Generic Sip Phones; Commissioning Generic Sip Sets - Alcatel-Lucent OmniPCX Office Installation Manual

Chapter
4
The 4135 IP Conference Phone set software is automatically upgraded during OmniPCX
Office software upgrade (there is no specific option to select in the OMC-Software Download
window: refer to
The 4135 IP Conference Phone set software can also be upgraded manually through the MMI.
4.4.3

Generic SIP Phones

4.4.3.1 Commissioning
4.4.3.1.1 Overview
This module presents all the actions required for commissioning generic SIP sets.
The List of supported SIP Phones is available on the Alcatel-Lucent Applications Partner
Program (AAPP) web site.

4.4.3.1.2 Commissioning Generic SIP Sets

This section describes how to commission a generic SIP Set.
The following operations must be performed:
1. Configure the user in OMC, refer to
2. Connect the set, refer to
3. Configure the generic SIP set, refer to
Prerequisites
- The Alcatel-Lucent OmniPCX Office Communication Server must be R810 or higher and
must be operational
- A free IP address must be available for the set
- A port with PoE must be available on a switch
Configuring the User in OMC
To create a generic SIP set:
1. In OMC, go to Users/Base stations List.
2. Select a No., IP access and click on the Add button.
3. Select IP terminal and enter a Name.
4. Select the newly created user in the list and select Basic SIP Phone or Open SIP Phone
in the combo box.
See the different features relating to basic or open SIP modes: module List of Services
Provided - Services provided - Services Offered on SIP Sets
5. Click the Modify button.
6. Click the Details button. The User window is opened.
7. Click the IP/SIP button. The IP/SIP parameters window is opened.
8. In the SIP parameters tab, click the SIP password reset button. A new password is
generated in the SIP password field.
4-46
module System Startup from OMC - Downloading the Software
Connecting the Set
Configuring the User in OMC
and switch it on
Configuring the generic SIP set
)