Intelligent Base Stations; Detailed Description - Alcatel-Lucent OmniPCX Office Installation Manual

8
Power supply socket:
Pin
1
2
4.9.3.3 Power Supply Details
The interface module local power supply is required only when S0 terminals do not have their
own local supply.
The power supply unit depends on country:
Reference
1AF00446CAAA
1AF00446ABAA
1AF00446AGAA
1AF00446ASAA
1AF00446AUAA
1AF00446BAAA
4.9.3.4 Environment
Working temperature: 5°C to 45°C
Stocking temperature: -40°C to 70°C
Relative humidity: 5% to 85%
4.10

Intelligent Base Stations

4.10.1

Detailed description

This notice describes the rules to follow for an installation comprising three or four DECT
bases.
For a larger installation, a preliminary study must be carried out using coverage tools. The
bases are then installed according to the results of this study.
4.10.1.1 CONNECTION
The Alcatel-Lucent 4070 IO is designed for internal installation in the building, while the
Alcatel-Lucent 4070 EO is designed for external installation.
The 4070 EO IBS comes in a plastic box and is protected against temperature variation.
The 2 antennae are outside the box so that they both have the same signal reception.
Intelligent Base Stations (IBS) are fitted with a red LED that gives information about the state
of the Base Station:
Not used
Description
0V
40V DC
Characteristics
230V AC/42V DC 150mA
127V AC/44V DC 150mA
220V AC/42V DC 150mA
240V AC/42V DC 150mA
115V AC/42V DC 150mA
230V AC/42V DC 150mA
Country
Europe
Brazil
Argentina
Australia
USA
UK
4-81