Migration - Alcatel-Lucent OmniPCX Office Installation Manual

Chapter
4
If the hardware platform is downgraded, data can be lost.
For example, the removal of a hard disk is not supported:
-
If ACD statistics are available
-
If more than 4 hours VMU support is available
Lola installation is required and all data can be lost.
4.13.1.5.1 Upgrading Phone sets
All phone sets not supported in releases lower than R8.0 must be installed after the successful
migration to R8.x.
The phone sets not supported by earlier releases must not be plugged before migrating to a
version that can support them.

4.13.1.5.2 Migration

Prerequisites
To carry out an upgrade to R8.x, you need:
- A migration kit for the PowerCPU
- The correct version of R8.x with the R8.x software licenses
- LOLA R4.x
- Free disk space on the installer hard disk to contain all existing data
Migration to OmniPCX Office RCE Small, Medium, Large
The following sequence is used to migrate from an R3.x/R4.x/R5.x/R6.x/R7.x Alcatel-Lucent
OmniPCX Office Premium Edition CS or Alcatel-Lucent OmniPCX Office Advanced Edition CS
to R8.x OmniPCX Office RCE Small, Medium, Large.
1. Use the OMC, Release 8 to save configuration data.
2. In OMC off-line, adapt the saved database to R8.x hardware level (change CPU type,
remove CoCPUs).
3. Use LOLA to save customer data from the current main CPU (select option Migration
mono CPU).
4. Unplug the CPU and the unsupported boards from the system.
5. Change the existing hardware for R8.x hardware
6. Plug the PowerCPU.
7. Use LOLA to install the R8.x.
8. Use LOLA to restore the previously saved customer data.
9. Use OMC to restore the previously saved and modified configuration data.
Migration to R8.x OmniPCX Office RCE Compact
The following sequence is used to migrate to R8.x OmniPCX Office RCE Compact.
1. Use the OMC, Release 8 to save configuration data
2. In OMC off-line, adapt the saved database to R8.x hardware level (change CPU type,
4-106