Connecting An Alarm; Connecting A Broadcast Loudspeaker; Connecting A General Ringer - Alcatel-Lucent OmniPCX Office Installation Manual

Chapter
4

4.2.1.7.3 Connecting an Alarm

The alarm is activated in the event of a false stopping of the system.
It is connected via the ALARM output (control contact closed when idle) of the AUDIO
connector.

4.2.1.7.4 Connecting a Broadcast Loudspeaker

Broadcast loudspeakers are connected via the AUDOUT output of the AUDIO connector.
Audio Output Characteristics:
- Output impedance: < 500 Ohms
- Output level: access + 3 dBr

4.2.1.7.5 Connecting a General Ringer

The general ringer is connected via the CENRG output of the AUX connector.
4-16