Ddi-X Board; Ata Board; Daughter Board Provision On Powercpu Board - Alcatel-Lucent OmniPCX Office Installation Manual

2.4.2.11

DDI-X Board

This board is used to connect 2 or 4 analog trunk lines with Multiple Subscriber Numbers.
2.4.2.12

ATA Board

The ATA (Analog Trunk Access) board serves to connect analog trunk lines (2 or 4 TL).
The ATA board does not support pulse dialing in Australia and New Zealand.
2.4.2.13

Daughter Board Provision on PowerCPU Board

The table below presents the daughter boards which can be provided on the PowerCPU
board, according to the platform used.
Daughter Boards
ARMADA VoIP32
AFU-1
SATA HARD DISK +
SATAEXT board
Mini-Mix
Note:
The Mini-MIX daughter board requires BACKXS-N back panel and PSXS-N power supply module. The
OmniPCX Office RCE Compact
HSL1
HSL2
Yes
No
No
Yes
Yes
Yes
OmniPCX Office RCE Small,
Medium, Large
Yes
Yes
Yes
Yes
Yes
No
2-13