Sending Method; Memory Sending; Using The Adf - Canon imageRunner 1670F Facsimile Manual

Sending Method

Memory Sending

The machine begins calling the other party and transmitting the information
after all documents are scanned into memory. Because the machine is
multitasking, you can even scan a document into memory while performing other
3
tasks. The machine has enough memory to store up to approximately 255 pages*
(fewer if the document contains many graphics or particularly dense text).
* Based on ITU-T No.1 Chart, Standard mode.
NOTE

Using the ADF

1
2
3-10

Sending Method

When a large amount of memory is used, the message <MEMORY FULL> may be
displayed depending on the documents to be sent, or the machine can neither store
the scanned documents in memory nor send them. In this case, print or delete any
documents in memory, or select a lower fax resolution, such as <STANDARD>, and
then send the documents.
Press [FAX] to set the machine to the Fax mode.
FAX 12/03/2004 15:30
FaxTel STANDARD
Prepare the document and load it face down in the ADF.
MEM IN USE
The currently used memory is displayed.
DOCUMENT READY
Standby to scan.
To adjust the resolution, see "Adjusting the Scan Settings," on p. 3-2.
•
To adjust the contrast, see "Fax Settings," on p. 6-6.
•
0%