menu setup
monitor
You can set the information displayed on the monitor as well as the output system.
monitor settings
You can configure the monitor output-related settings including the displayed information, dwell time and output
system.
• Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs.
If you set <Continuous>, it will keep displaying until you cancel it.
• Display : Displays only checked items on the monitor screen.
• Multi CH SEQ Time : Set the automatic switching time for the segmented screen in live mode.
• Video Output : Select a video output type from <hdmi> and <vgA>.
If your selection of <hdmi> or <vgA> does not match with the monitor setting, the video may not be output.
If the changed resolution is not supported by the monitor, the video may not be displayed properly. If this is the case, the screen
`
will restore the default resolution after a certain time. Then, you can change it to a different resolution.
Specify the event display time and dwell time in consideration of the video delay depending on the network environment.
`
M
70_ menu setup