Monitor Settings - Samsung SRN-472S User Manual

Remote Devices
You can adjust the ID for a remote control to be used in connection with NVR.
[MENU] [ENTER] ▼
[ENTER] ▲▼◄► [ENTER]
• Remote control: Select whether to use a remote control.
• ID: Select an ID number linked to a camera.
If the remote control ID does not match, it will not operate properly.
`
M To change the remote control ID, refer to "Changing the Remote Control ID". (Page 12)
Monitor
You can set the information displayed on the monitor as well as the output system.

Monitor settings

You can configure the monitor output-related settings including the displayed information, dwell time and output
system.
[MENU] [ENTER] ▼
[ENTER]
• Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs.
If you set it to <Continuous>, it will continue to display, until you press the [ALARM] button to cancel it.
• Display : Displays only checked items on the monitor screen.
• Sequence switching time : Set the automatic switching time for the segmented screen in live mode.
<Menu> [ENTER] ▼
<Menu> [ENTER] ▼
<Device> ►▼ <Remote Device>
<Device> ►▼ <Monitor> ▲▼◄►
English _67