Samsung SRN-4000 User Manual page 78

menu setup
network Camera
• Apply to CH : If you select <Apply to Ch>, the "Apply to Ch" confirmation window will appear.
After selecting channels that the settings will be applied to, click on <oK> to apply them to the selected
channels.
• Camera Event : Select whether or not to use a camera event.
• MD : Select whether or not to use motion detection from camera.
• Cam : Select an event detection channel.
• If you select a camera item, the "Camera preset" screen will appear. Select a channel to connect and set the
preset.
You can set the preset in PTZ mode.
`
• Alarm : Select the method for alarm output.
For more details, refer to "HDD alarm > Alarm". (Page 69)
`
• Alarm Duration : Set the duration of alarm.
• Camera MD : You can set the detailed setting of motion detection for a network camera connected.
- Mode : Set the motion detection mode.
- Area : Click on <Setup> and when the detailed setup menu appears, set the motion detection area.
- Sensitivity : Set the sensitivity for motion detection. (very low/low//medium/high/very high).
- Size : Click on <Setup>. When the detailed setup menu appears, set the max/min size of the object to be
detected.
- Activation Time : Select the operation time of motion detection.
After finishing with setup, click on the <oK> button to move back to the previous screen after saving the setup.
78_ menu setup