Samsung SRN-4000 User Manual page 84

menu setup
ddnS
If a remote user accesses the network, you can set whether or not to use DDNS and the site to be connected.
• DDNS Site : Specify the use of DDNS and select a site that you registered.
• Host Name : Provide the host name that you registered with the DDNS site.
• User Name : Provide the user ID that you registered with the DDNS Site.
• Password : Provide the password that you registered with the DDNS site.
Refer to "Using Virtual Keyboard". (Page 42)
`
M
If you select <OFF>, the input box will be inactive.
`
If you select <iPOLiS>, the host name input box will be inactive. The user name input box will be active.
`
• Quick Connect : Appears if the <samsungipolis.com> is selected for a <ddnS Site>.
To use the function, set to <use> after connecting the NVR to a UPnP router.
If canceled during Quick Connect configuration, it automatically switches to <Not Use> and saved.
`
M
To check Quick Connect status
A progress bar and its message appears for a Quick Connect.
• Quick Connect Success : Message for a successful connection.
• invalid network Configuration : Message appears if the network configuration is not valid. Check the
configuration.
• please enable upnp function of the router : Message appears if the router requires UPnP function
enabled.
• failed to find the router : Message appears if the router is not found. Check the router's configurations.
• please restart the router : Message appears if the router should be restarted.
84_ menu setup