5.2. Network Setup
On the default LCD screen, press ∧, ∨ to move to the screen shown below and press
ENTER.
2. Network Setup
[SET]
Sub-menus will appear where you can use the ∧, ∨ buttons to navigate.
1. Monitoring Port
2. Source Port
3. Storage Port
For information on each network setting and its operation, please refer to "4.6.6.
Network Setup"
Note
5.2.1. Monitor Ethernet Port Setup
The Monitor Ethernet Port is a port used to connect your computer to the product.
Under Network Setup, select 1. Monitor Ethernet Port, and press ENTER.
1. Use Static IP
2. Use DHCP (Client)
3. Use PPPoE
4. Use DDNS
Use one of the first 3 options to set an IP address for the Monitor Ethernet Port. Selecting
menu item 4 lets you to use DDNS instead of an IP address.
Static IP Setting
Press ∧ and ∨ to select 1. Use Static IP, and then press Enter.
IP Address
0.0.0.0
82