Samsung SRN-4000 User Manual page 39

preset
Preset is a specific position remembered by the PTZ camera. You can use the Preset function to define up to
255 presets for a single PTZ camera.
To add a preset
1. Check the preset checkbox.
2. Select <Add>.
The virtual keyboard will appear on the screen. Use it to provide the preset name.
Refer to "Using Virtual Keyboard". (Page 42)
`
• Rename : You can change the preset settings to your preference.
• Delete : Delete a selected preset.
• Delete All : Delete all the existing preset settings.
You can add up to 255 presets, which is the max count supported by the NVR.
`
M
If you replace a camera that saves your preset settings with a different one, you must configure the preset settings again.
`
3. Select <oK>.
The preset setting will be saved in the provided name.
To change or delete a registered preset
1. Check the preset checkbox and select a preset to change or delete.
2. Press <
> or < > as needed.
• : Delete all the existing preset settings.
If you delete the entire presets, the default presets specified in the network camera can be deleted accordingly.
`
J
3. Provide a new name and press <oK>.
English _39