Network Configuration - Samsung SRN-4000 User Manual

menu setup

neTworK ConfigurATion

It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with
events. You can configure the network environment which enables such functions.
interface
You can set the network connection route and protocol.
Setting a network connection
Sets the protocol and environment of the network.
• Network1 (Camera) : Port for camera connections; it receives video from a camera.
• Network2 (Camera) : Port for camera connections; it receives video from a camera.
• Network3 (Viewer) : Port used to send video to the web viewer.
• Network4 (iSCSI) : Port to make a connection to the external iSCSI.
• Network1 (Camera) / Network2 (Camera) / Network3 (Viewer) / Network4 (iSCSI) setup
- IP Type : Select a network connection type.
- IP Address, Subnet Mask, Gateway, DNS
<Static> : You can manually enter IP address, subnet mask, gateway and DNS.
<dhCp> : IP address, subnet mask and gateway values will be automatically set.
<pppoe> : IP address, subnet mask and gateway values will be automatically set.
- User ID, Password : If you set the connection mode to PPPoE, you need to enter "user id" and
"password" to register in PPPoE.
• Transfer bandwidth (Network3) : Enter the maximum amount of upload data bandwidth.
Check the assigned setting in Connection Mode before entering your value.
If the sum of the network TX/RX is less than 700Mbps, there is a max transmission rate of 400Mbps.
`
• Default Gateway : Set the basic gateway by using Network1 (Camera) / Network2 (Camera) / Network3
(Viewer) / Network4 (iSCSI) setup.
You can manually input DNS of <DHCP> and <PPPoE> when it selected to <Manual>.
`
M
80_ menu setup