Samsung SRN-4000 User Manual page 58

menu setup
If you change the settings of a specific profile for each model, the effective range of the baud rate may be changed
`
M
accordingly.
Ex) if you set the baud rate of the first profile to 30fps, the send rate of the second profile will be changed to 15fps.
Menu items except Codec, Resolution, Transfer Rate, and Transfer Quality can be configured in the network camera's
`
settings menu.
If you change the current profile settings, you may encounter an interrupted playback on the recording or live screen for a
`
certain time.
Changes made in Camera Setup page are applied immediately, while changes made through the camera's web page may
`
require up to 3 minutes.
Setup
In the bottom of the camera setting screen, press the <Setup> button to set your camera while watching the
live video of the selected camera.
If your camera does not support SUNAPI or the admin permissions, you cannot connect to it. Also, you will be directed to the
`
M
page of the camera with the first number.
For more details on camera settings, refer to the camera user manual.
`
Settings and operational spec vary depending on each camera.
This function is not supported in some models.
`
SSdr
If there is a significant difference between the dark and the bright areas, increase the brightness of the dark
areas to maintain the level of brightness of the entire area.
Mode, level, D-Range can be set.
Backlight
You can view both bright and dark areas.
Mode, WDR level, WDR black/white levels can be set.
58_ menu setup