Samsung SRN-4000 User Manual page 52

menu setup
2. Search for a network camera connected.
An already registered camera will be marked in blue in the list.
`
If you search for the camera again or if the IP is an old IP that was not assigned by the DHCP server (such as -192.168.1.100),
`
then press the <
assign the IP manually.
3. Select a camera from the camera list to see a preview of its current video feed.
4. Check the checkbox next to a network camera that you want to connect to.
You can select all of the network cameras in the list and provide <ID> and <Password> all at once.
`
Click a header at the top of the list to sort the list according to that header.
`
Registering camera with user account other than admin may restrict camera function.
`
J
5. Click on the <id/pw> button to enter the selected network camera's <id> and <password>.
6. Press the <Connection Test> button to make a connection to a camera.
7. Press <register> to register the selected camera.
To manually search for and register a network camera
1. In the <register> menu, click on the <manual> button.
2. The manual search window will appear.
3. Select a channel and protocol used to connect to a camera.
The input items may differ depending on the selected protocol.
• SAMSUNG : Comply with the internal network protocols adopted by Samsung Techwin.
• ONVIF : Means the camera supports ONVIF protocols. When connecting a camera that its name cannot be
found from the list, select <onvif>.
Time difference between the ONVIF camera and NVR exceeds more than 2 minutes, the camera cannot be connected. In this
`
M
case, synchronize the ONVIF camera's time to the NVR or set times of both camera and NVR to a same NTP server (if in the
same time zone), or make the NVR an NTP server.
• RTSP : Comply with RFC 2326, one of "Real Time Streaming Protocol (RTSP)" for real-time streaming.
52_ menu setup
> button to check if a new IP has been assigned. If the IP is still the same, then select Assign IP to