search & play
pLAyBACK
play
You can play data stored in the HDD and backup a desired portion of the data.
Scene Mode
►
Channel Info
Live Status
Record Status
►
Layout
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Menu
►
Quick Setup
Shutdown
Hide Launcher
Logout
1. In the live screen menu, select the <play> menu or click on <
2. Select a menu for searches.
If this is the first time you try to play, you will start with the data search window.
`
For data search, refer to "Search". (Page 92)
3. Select a data item and click <play> in the Search menu.
The selected data is played and the play launcher appears on the screen.
If there is an existing data, <Play> will start immediately without performing the search.
`
• Playback Information : Displays the date and time of the current data in the top corner.
• Backup : Click <
using the mouse (yellow triangle).
> again to set the current time to the end time of the backup and the "Backup range" window
Click <
appears.
- Type : Supports formats of NVR and SEC.
- Device : Select a backup device.
- Check Capacity : Enables you to check the capacity of the selected storage device.
4. If you want to go back to the live screen during plays, then click on <
96_ search & play
> to set the current time to the start time of backup; you can specify a backup area
> in the launcher menu.
> of the launcher menu.