Samsung SRN-4000 User Manual page 64

menu setup
• Format : Select a device and click on format after which a format confirmation window appears.
Click on the <oK> button to format the selected storage device.
Formatting will delete all the recording data that has been saved. Be careful.
`
J
While formatting is ongoing, you cannot record video.
`
Do not remove a formatting device until it is finished.
`
• HDD Map : You can check the location according to the assigned number for the HDDs installed inside.
Refer to this when servicing or installing an additional HDD.
`
Connecting the iSCSi
If you connect the NVR with an iSCSI device, you can search, connect and disconnect the iSCSI device.
• iSCSI Usable Name : It displays the name of iSCSI in compliance with the iSCSI protocol format.
• Capacity : It displays the currently used amount/total capacity of iSCSI devices.
• Status : Displays the status of an installed iSCSI device.
List of products supported
Promise Technology vessRAID 1740i / 1840i 1ea JBOD 3ea
Adding an iSCSi device automatically
1. In the iSCSI window, click on the <Add Automatically> button.
2. On the Auto Add screen, enter the IP address and the connecting port, and click <Search>.
3. In the <iSCSi usable name> list, click on a device to add.
4. After entering ID/password, click on the <oK> button.
64_ menu setup