Samsung SRN-4000 User Manual page 81

Connecting and Setting the network
Networking may differ from the connection method, check your environment before setting the connection
mode.
when no router is used
• Static ip mode
- Internet connection : Static IP, leased line, and LAN environments allows connection between the NVR and
remote user.
- NVR Network Settings : Set the <network> in <interface> menu of the connected NVR to <Static>.
Consult your network manager for IP, Gateway and Subnet Mask.
`
• dhCp mode
- Internet connection : Connect the NVR directly to a cable modem, DHCP ADSL modem or FTTH network.
- NVR Network Settings : Set the <network> in <interface> menu of the connected NVR to <dhCp>.
• pppoe
- Internet connection : An PPPoE modem is directly connected to the NVR, where the PPPoE connection
requires user ID and password.
- NVR Network Settings : Set the <network> in <interface> menu of the connected NVR to <pppoe>.
PPPoE <User ID> and <Password> should be the same to the PPPoE user information.
`
If you don't know the ID and password, consult your PPPoE service provider.
English _81