Avaya 4600 Series Administrator's Manual page 209

## call is forwarded to the forward or coverage address.
## The default delay is one ring cycle.
##
## CALLFWDADDR sets the address to which calls are
## forwarded for the call forwarding feature. The default
## is null ("").
## Note the user can change or replace this
## administered value if CALLFWDSTAT is not 0.
##
## COVERAGEADDR sets the address to which calls will be
## forwarded for the call coverage feature. The default
## is null ("").
## Note the user can change or replace this
## administered value if CALLFWDSTAT is not 0.
##
## DATESEPARATOR sets the character to be used to delineate
## the date values. The default is a backslash.
##
## DATETIMEFORMAT sets the formatting of the date display.
## The default is 0, which means the SIP phone will display
## 12-hour time and displays dates in mm/dd/yy format.
## Setting DATETIMEFORMAT to 1 means the SIP phone will
## display 12-hour time and displays dates in dd/mm/yy
## format. Setting DATETIMEFORMAT to 2 means the SIP phone
## will display 24-hour time and displays dates in
## mm/dd/yy format. Setting DATETIMEFORMAT to 3 means the
## SIP phone will display 24-hour time and displays dates
## in dd/mm/yy format.
##
## DIALPLAN sets the dial plan variable that the phone uses
## to automatically terminate a dial string. The default
## is null ("").
## See the 4600 Series IP Telephone LAN Admin Guide for
## format and setting alternatives.
##
## DIALWAIT sets the time (in seconds) the phone waits
## after the user enters the most recent dialable character
## before it automatically begins dialing. A value of 0
## disables the wait timer. The default is 5, and valid
## values are 0-10 seconds.
##
## MUSICSRVR is not currently used and should be ignored or
## set to null ("").
Introduction
Issue 8 July 2008 209