Avaya 4600 Series Administrator's Manual page 110

Server Administration
Table 10: 4600 Series IP Telephone Customizable System Parameters (continued)
Parameter Name
PHY2PRIO
PHY2VLAN
PHY2STAT
PROCPSWD
PROCSTAT
PUSHCAP
PUSHPORT
QKLOGINSTAT
REGISTERWAIT
110 4600 Series IP Telephone LAN Administrator Guide
Default Value Description and Value Range
0 Layer 2 priority value for frames received on or forwarded to
the secondary Ethernet interface. Set this parameter only
when VLAN separation is enabled. Values are from 0-7.
0 VLAN identifier used by frames received on or forwarded to
the secondary Ethernet interface. Set this parameter only
when VLAN separation is enabled. Value is 1-4 ASCII
numeric digits from "0" to "4094." Null is not a valid value,
nor can the value contain spaces. If this value is set by
LLDP using the Port VLAN ID TLV value, it will not change
regardless of settings from other sources. For more
information, see
1 Secondary Ethernet interface setting
(0=Secondary Ethernet interface off/disabled, 1=auto,
2=10Mbps half-duplex, 3=10Mbps full-duplex, 4=100Mbps
half-duplex, 5=100Mbps full-duplex).
" " (Null) Text string containing the local (dialpad) procedure
password (Null or 1-7 ASCII digits).
As of Release 2.8, Communication Manager Release 3.1.3
and above supports the downloading of the PROCPSWD
setting upon registration of the individual phone.
0 Local (dialpad) Administrative Options status
(0=all Administrative Options are allowed, 1=only VIEW is
allowed).
222 Push capabilities - audio receive push value (hundreds),
Web push value (tens), or Top Line value. Any values other
than combinations of 0, 1, and/or 2 are treated as "0"
(disabled). Values are 000 to 999, defined as:
0 = Push disabled.
1 = Normal only push allowed.
2 = Normal and/or barge-on push allowed.
For example, if the value is "222" everything is allowed, if
the value is "111" no barge-in is allowed, and the value 200
signifies both a normal and barge-in audio push, but not a
Web or Top Line push.
80 Destination TCP port for the telephone's HTTP server. Valid
values are: 80 to 65535.
1 Quick Login Status. Valid values are:
0=Delete H.323 registration password upon user logoff.
1=Retain H.323 registration password upon user logoff.
Applies only to Releases 2.7 and later.
3600 SIP Re-registration Interval. The SIP registration expiration
interval (in seconds) sent to the SIP registrar during
registration. Valid values are 1 to 5 ASCII numeric
characters from 0 to 65535. Null ("") is not a valid value, and
the value may not contain spaces.
Parameter Data Precedence.
9 of 12