Adding The Dhcp Option; Activating The Leases; Verifying Your Configuration - Avaya 4600 Series Administrator's Manual

Server Administration
12. Enter the Gateway IP Address recorded in
Installation - Per DHCP Server
13. Select Add and then OK.

Adding the DHCP Option

Use the following procedure to add the DHCP option.
1. Highlight the scope you just created.
2. Select Scope under DHCP Options.
3. Select the 176 option that you created from the Unused Options list.
4. Click the Add button.
5. Select option 003 from the Unused Options list.
6. Click the Add button.
7. Click the OK button.
8. Select the Global parameter under DHCP Options.
9. Select the 176 option that you created from the Unused Options list.
10. Click the Add button.
11. Click the OK button.

Activating the Leases

Use the following procedure to activate the leases.
1. Click Activate under the Scope menu.
The light-bulb icon for the scope lights.

Verifying Your Configuration

This section describes how to verify that the 46XXOPTIONs are correctly configured for the
®
Windows NT
Verify the Default Option, 176 46XXOPTION
Use the following procedure to verify the default option.
1. Select Start-->Programs-->Admin Tools-->DHCP Manager.
2. Expand Local Machine in the DHCP servers window by double clicking until the + sign
changes to a - sign.
3. In the DHCP servers frame, click the scope for the IP telephone.
4. Select Defaults from the DHCP_Options menu.
68 4600 Series IP Telephone LAN Administrator Guide
4.0 DHCP server.
Table 3: Required Network Information Before
for the New IP Address field.