Avaya 4600 Series Administrator's Manual page 194

Sample Upgrade Script File
## 8 for debug
## SET LOGLOCAL 5
##
## Syslog Server address
## One syslog server IP Address in dotted-decimal or DNS
## name format (0 to 255 ASCII characters).
## SET LOGSRVR 192.168.0.15
##
##
############### DISPLAY BACKLIGHT CONTROL ################
##
## Idle Time Before Turning Off Backlight (minutes)
## Number of minutes without phone activity to wait
## before turning off backlight. A value of 0 means the
## backlight is never turned off. This parameter is
## supported only by phones which have a backlight.
## The default is 120 minutes.
## SET BAKLIGHTOFF 120
##
##
##################### 802.1X SETTINGS ####################
##
## This setting determines the 802.1X operating mode
## 0: Unicast Supplicant operation only, with PAE
## multicast pass-through.
## No proxy Logoff. DEFAULT OPERATION.
## 1: Same operation as for "0" but with proxy Logoff.
## 2: Unicast or multicast Supplicant operation.
## No PAE multicast pass-through or proxy Logoff.
## SET DOT1X 0
##
###################### ICMP SETTINGS #####################
##
## Destination Unreachable Message Control
## Controls whether ICMP Destination Unreachable messages
## are generated.
## 0 for No
## 1 for limited Port Unreachable messages
## 2 for Protocol and Port Unreachable messages
## SET ICMPDU 1
##
## Redirect Message control
## Controls whether received ICMP Redirect messages will
194 4600 Series IP Telephone LAN Administrator Guide