Avaya 4600 Series Administrator's Manual page 206

Sample Upgrade Script File
##
## Reregistration Timer
## Controls an H.323 protocol timer. It is highly
## recommended you consult Avaya before changing this
## parameter.
## SET REREGISTER 20
##
## CTI Status
## Controls the status of the Computer-Telephony Interface.
## 0 for disabled, 1 for enabled
## SET CTISTAT 0
##
## CTI Port
## Sets the UDP port number for reception of broadcast
## CTI discovery messages. (49714-49721).
## SET CTIUDPPORT 49721
##
##
############################################################
##
##
## Settings specific to telephones with SIP software
##
############################################################
##
## REGISTERWAIT sets the time, in seconds, between
## re-registrations with the current server. The default
## is 3600 (60 minutes) and valid values are 0-65536 for
## 46xx SIP telephones and 10-1000000000 for 96xx phones.
##
## SIPDOMAIN sets the domain name to be used during
## registration. The default is null ("") but valid values
## are 0 to 255 ASCII characters with no spaces.
##
## SIPPROXYSRVR sets the IP Address or Fully-Qualified
## Domain Name (FQDN) of the SIP Proxy server(s). The
## default is null (""), but valid values are zero or more
## IP Addresses in dotted-decimal or DNS format, separated
## by commas without intervening spaces, to a maximum of
## 255 ASCII characters. (For 96xx SIP models, only one
## server address is supported.)
##
## SIPPORT sets the port that the telephone set will listen
206 4600 Series IP Telephone LAN Administrator Guide
SIP SETTINGS
##
##
##
##