Getting started
Telephone base setup
Line selection
Use this feature to select the default telephone line to be used when you
make outgoing calls. This telephone comes factory set for Auto selectable
line, which chooses the first available line for making a call. To select a
particular line, choose Line 1, Line 2, Line 3 or Line 4.
1.
When the telephone is idle, press MENU
2.
Press
or
3.
Press
or
4.
Press
or
or Line 4.
5.
Press
ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
Set line mode
Use this feature to individually select the line mode for each available
telephone line. For the system to behave properly, it needs to be set for:
a) PBX lines, which are typical business telephone systems that require you
to dial 8 or 9 to get an outside line.
-OR-
b) CO lines, which are standard residential telephone lines.
This telephone comes factory set for PBX lines.
1.
When the telephone is idle, press MENU
2.
Press
or
3.
Press
or
4.
Press
or
5.
Press REP or SKIP to select PBX or CO.
6.
Repeat Steps 4 and 5 to choose the line mode for other
lines if desired.
ENTER to save the setting and return to the previous menu.
7.
Press
MENU/
There is a confirmation tone. To exit without making changes, press EXIT.
to scroll to Base setup. Press
to scroll to Line selection. Press
to select Auto, Line 1, Line 2, Line 3
to scroll to Base setup. Press
to scroll to Set line mode. Press
to scroll to a desired line (L1, L2, L3 or L4).
.
/ENTER
MENU/
ENTER.
MENU/
.
/ENTER
ENTER.
MENU/
ENTER.
MENU/
19
Call log
Ringer setting
Mailbox setup
ENTER.
Base setup
>
LCD contrast
Key tone
Language
Line selection
>
Line selection
:Auto
ENTER=Save
Key tone
Language
Line selection
Set line mode
>
L1
L2
L3
L4
CO
PBX
CO
PBX