Hold Reminder; Set Date And Time - AT&T SynJ SB67158 User Manual

Getting started
Telephone base setup

Hold reminder

When there is a call on hold for more than three minutes,
the telephone base gives you a reminder beep once every
30 seconds. You can also turn this setting off.
When the telephone is idle, press MENU
1.
2. Press or
3. Press or
4. Press or
5. Press ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.

Set date and time

The answering system displays the date and time of the message while
playing messages. Before using the answering system, set the date and time
as follows. If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. The year must be set so that the
day of the week can be calculated from the caller ID information.
Follow the steps below to set the month, day, year and time:
1. When the telephone is idle, press MENU
2. Press or
3. Press or
4. Using the dial pad to enter the date. Press REP or SKIP
to scroll to the item you want to edit, and press the dial pad
keys to enter the correct digit.
5. Press to move to the time editing.
6. Press or
7. Press REP or SKIP to scroll to the item you want to edit,
and press the dial pad to enter the correct digit.
ENTER to save the setting and return to the previous menu. There is
8. Press
MENU/
a confirmation tone. To exit without making changes, press EXIT.
NOTES:
• The time is in a 12-hour clock format. If you set an invalid time, you will hear an error
tone while pressing
cannot be saved. You need to correct the time entry to continue the setup process.
• If the date and time are not set when a message is recorded, the system does not
display date and time on the screen while playing messages.
to scroll to Base setup. Press
to scroll to Hold reminder. Press
to scroll to On or Off.
to scroll to Base setup. Press
to scroll to Date and time. Press
to select AM or PM.
ENTER to save the setting. The error tone means the setting
MENU/
.
/ENTER
ENTER.
MENU/
ENTER.
MENU/
.
/ENTER
ENTER.
MENU/
ENTER.
MENU/
21
Line selection
Set line mode
Area codes
Hold reminder
>
Hold reminder
:On
ENTER=Save
Flashing
Set line mode
Area codes
Hold reminder
Date and time
>
Date: 12.31. 2006
Time: 09:00 AM
^v=PM
ENTER=Save
Date: 01.01. 2009
Time: 12:00 PM
^v=AM
ENTER=Save