Quick Reference - AT&T SynJ SB67158 User Manual

Answering system
Remote access
4. Hang up to end the call and save all undeleted messages.
Cut out the remote access wallet card at the back of this user's manual for

quick reference.

NOTES:
• If you do not enter a valid remote access code, the answering system answers the call
as usual and all the voice and digits entered will be recorded as messages stored in your
general mailbox.
• If you do not enter any remote access code, the answering system announces "Thank
you for calling," and the call ends.
• When there is no new message or all the new messages are played during remote
access, you hear a help menu listing all features and commands. If there is no command
after the help menu is played three times, the call ends automatically.
• If the memory is full, you hear a two-beep alert tone and the answering system
"Memory is full." The telephone base screen displays Message full. and you cannot record
new messages until old ones have been deleted. Check the system remaining space (page
34) frequently to maintain availability of space for incoming messages.
• If you press 4 within five seconds of each message playback start, the previous message
plays instead of repeating the current message.
80
announces,