AT&T SynJ SB67158 User Manual page 29

Getting started
Telephone base setup
Listen to the music on hold:
When the telephone is idle, press MENU
1.
2. Press or
3. Press or
4. Press or
5. Press or
If you select Recorded M.O.H., press
hear the current recording or the default music.
-OR-
If you select Aux In Device, press
the current music playing on your audio device that is
connected to the telephone base.
-OR-
If you select Aux In Device but there is no audio
device connected with the telephone base, No Device is
connected to the headset jack at base displays on the
screen. Connect an audio device to the HEADSET/AUX IN
jack (as shown below), then choose Review M.O.H.
6. Press REP to return to the previous menu.
Change the music on hold volume:
The music on hold volume can only be changed at the audio device.
1. Place a call to your SynJ SB67158.
2. Press HOLD on the SynJ SB67158 to place the call on hold. Listen to the
music on hold to determine if the volume is desirable.
3. If you are using recorded audio and want to make adjustments to the volume
on the audio device and record the audio again, start again with Step 1 of
Change the music on hold volume.
-OR-
If you get streaming audio from a device and want to make adjustments
to the volume, change the volume on the audio device while the call is on
hold until you find the desired volume. When you finish listening to the
audio, hang up both telephones.
to scroll to Base setup. Press
to scroll to Music on hold. Press
to scroll to Review M.O.H. Press
to highlight Recorded M.O.H. or Aux In Device.
.
/ENTER
ENTER.
MENU/
ENTER.
MENU/
ENTER.
MENU/
ENTER to
MENU/
ENTER to hear
MENU/
23
M.O.H. on/off
Review M.O.H.
>
Record new M.O.H.
M.O.H. source
Recorded M.O.H.
>
Aux In Device
Play M.O.H.
01:42
<=Back
Aux In Device
playing
<=Back
Recorded M.O.H.
Aux In Device
>
No Device is
connected to the
headset jack at
base.