Line Selection; Set Line Mode - AT&T SynJ SB67158 User Manual

Getting started
Telephone base setup

Line selection

Use this feature to select the default telephone line to be used when you
make outgoing calls. This telephone comes factory set for Auto selectable
line, which chooses the first available line for making a call. To select a
particular line, choose Line 1, Line 2, Line 3 or Line 4.
When the telephone is idle, press MENU
1.
2. Press or
3. Press or
4. Press or
or Line 4.
ENTER to save the setting and return to
5. Press
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.

Set line mode

Use this feature to individually select the line mode for each available
telephone line. For the system to behave properly, it needs to be set for:
a) PBX lines, which are typical business telephone systems that require you
to dial 8 or 9 to get an outside line.
-OR-
b) CO lines, which are standard residential telephone lines.
This telephone comes factory set for PBX lines.
When the telephone is idle, press MENU
1.
2. Press or
3. Press or
4. Press or
5. Press REP or SKIP to select PBX or CO.
6. Repeat Steps 4 and 5 to choose the line mode for other
lines, if desired.
7. Press ENTER to save the setting and return to the previous menu.
MENU/
There is a confirmation tone. To exit without making changes, press EXIT.
to scroll to Base setup. Press
to scroll to Line selection. Press
to select Auto, Line 1, Line 2, Line 3
to scroll to Base setup. Press
to scroll to Set line mode. Press
to scroll to a desired line (L1, L2, L3 or L4).
.
/ENTER
ENTER.
MENU/
ENTER.
MENU/
.
/ENTER
ENTER.
MENU/
ENTER.
MENU/
20
Ringer setting
RestrictedPrefix
Mailbox setup
Base setup
>
LCD contrast
Key tone
Language
Line selection
>
Line selection
:Auto
ENTER=Save
Language
Line selection
Area codes
Set line mode
>
L1 CO
L2 PBX
L3 CO
L4 PBX