Covm; Covm (Central Office Voicemail); Covm Reset - AT&T SynJ SB67158 User Manual

Telephone base operation

COVM

COVM (central office voicemail)

If you subscribe to voicemail service with your
telephone service provider, turn on the COVM feature.
This feature displays COVM on the screen above
the line key of any telephone line that receives new
voicemail messages.
If you do not subscribe to voicemail service or want to disable the indicator,
turn off the COVM feature.
When the telephone is idle, press MENU
1.
2. Press or
ENTER again to select COVM on/off.
3. Press
MENU/
4. Press or
ENTER to save the setting and return to
5. Press
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.

COVM reset

Use this feature when the telephone indicates there is new voicemail but
there is none. For example, when you have accessed your voicemail while
away from the building. This feature only turns off the COVM indicator; it
does not delete your voicemail messages. As long as you have new voicemail
messages, your telephone service provider continues to send the signal to
turn on the indicator. You can reset COVM indicators individually or for all
the telephone lines using the All COVM reset command.
1. When the telephone is idle, press MENU
2. Press or
3. Press or
4. Press or
to clear the COVM indicator of a telephone line, or scroll
to All COVM reset to clear the indicators for all the line.
5. Press ENTER to execute the command and return
MENU/
to the previous menu. There is a confirmation tone. To
exit without making changes, press EXIT.
NOTE: For information about using your voicemail service, contact
your telephone service provider for assistance.
to scroll to COVM. Press
to select On or Off.
to scroll to COVM. Press
to scroll to COVM reset. Press
to scroll to COVM 1 reset-COVM 4 reset
.
/ENTER
ENTER.
MENU/
.
/ENTER
ENTER.
MENU/
ENTER.
MENU/
49
*: Base
0 Missed calls
2:43PM 1/13
COVM COVM
Ringer setting
Mailbox setup
Base setup
COVM
>
COVM on/off
>
COVM reset
COVM
:On
ENTER=Save
COVM on/off
COVM reset
>
COVM 1 reset
>
COVM 2 reset
COVM 3 reset
COVM 4 reset
COVM 2 reset
COVM 3 reset
COVM 4 reset
All COVM reset
>
COVM reset