Table of Contents
Advertisement
M
AKE SURE THE PRINT CARTRIDGE IS PROPERLY INSTALLED
Remove the print cartridge and shake it from side to side to redistribute the toner, and then reinstall it.
T
HE PRINT CARTRIDGE MAY BE DEFECTIVE OR LOW ON TONER
Replace the used print cartridge with a new one. If the problem continues, the printer may need to be serviced.
For more information, contact Customer Support.
Toner fog or background shading appears on the page
These are possible solutions. Try one or more of the following:
T
HE IMAGING KIT MAY BE WORN OR DEFECTIVE
Replace the imaging kit.
Note: The printer has two types of imaging kits: a black and color imaging kit, and a black imaging kit. The black
and color imaging kit contains cyan, magenta, yellow, and black. The black imaging kit contains black only.
I
S THERE TONER IN THE PAPER PATH
Contact Customer Support.
Toner rubs off
These are possible solutions. Try one or more of the following:
C
HECK THE PAPER TYPE SETTING
Make sure the paper type setting matches the paper loaded in the tray:
1
From the printer control panel, check the Paper Type setting from the Paper menu.
2
Before sending the job to print, specify the correct type setting:
For Windows users, specify the type from Print Properties.
For Macintosh users, specify the type from the Print dialog.
C
P
HECK THE
APER
From the printer control panel Paper menu, make sure the Paper Texture setting matches the paper loaded in the
tray.
?
T
EXTURE SETTING
Troubleshooting
222
Advertisement
Table of Contents
