Table of Contents
Advertisement
1
Adjusting the background density of the original ([Background Removal])
Adjust the density of the background area when copying originals with colored background (newsprints, re-
cycle paper, etc.) or originals that are so thin that text or images on the back would be scanned.
%
Tap [Original/Density] - [Background Removal].
Settings
[Background Removal]
[Background Removal Lev-
el]
Scanning originals of different sizes at the same time ([Mixed Original])
Using the ADF, you can scan an original that consists of multiple pages of different sizes, while detecting the
size of each page.
NOTICE
Load all originals along the left and back sides of the ADF.
%
Tap [Original/Density] - [Mixed Original].
1-26
Description
Press this button to copy a thin 2-sided original or an original with a colored
background, at the optimum level of image quality.
•
[Bleed Removal]: Select this option to prevent a back-side bleeding
when printing a 2-sided original that is so thin that the contents of the
back side would be scanned.
•
[Paper Discoloration Adj]: Select this option to scan an original with a
colored background such as a map.
Press this button to adjust the density of the background color for an orig-
inal with a colored background. If [Auto] is selected, the density of the
background color is determined automatically, and the original is copied
with optimal background density.
Using the copy function
d-Color MF552/452/362/282/222
1.3
Advertisement
Table of Contents
