Administrative Support; Restoring The Factory Default Settings; Using The Embedded Web Server - Olivetti d-Color MF920 Operation Manual

Administrative support

Restoring the factory default settings

Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings,
often referred to as the factory default settings.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Settings appears, and then press
4
Press the arrow buttons until General Settings appears, and then press
5
Press the arrow buttons until Factory Defaults appears, and then press
6
Press the arrow buttons until Restore Now appears, and then press
Submitting changes appears briefly.
7
Press , and then press
The following factory default settings are restored:
All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets.
All settings return to the factory default settings except Printer Language in the Setup menu and custom
settings in the Network and USB menus.

Using the Embedded Web Server

If the printer is installed on a network, the Embedded Web Server is available for a range of functions:
Configuring printer settings
Checking the status of the printer supplies
Configuring network settings
Viewing reports
Restoring the factory default settings
Viewing the virtual display
Setting Web page password protect
Setting Panel PIN protect
Setting the date and time
To access the Embedded Web Server:
1
Type the printer IP address into the address field of your Web browser.
If you do not know the IP address of the printer, you can:
View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.
Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.
.
until Ready appears.
Administrative support
.
.
198
.
.