Olivetti d-Color MF920 Operation Manual page 130

Menu item
USB Buffer
Disabled
Auto
Mac Binary PS
On
Off
Auto
ENA Address
ENA Netmask
ENA Gateway
Description
Sets the size of the USB input buffer
Notes:
Auto is the factory default setting.
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
Auto is the factory default setting.
The Off setting filters print jobs using the standard protocol.
The On setting processes raw binary PostScript print jobs.
Sets the network address information for an external print server that is attached
to the printer using a USB cable
Note: This menu item is available only if the printer is attached to an external printer
server through the USB port.
Sets the netmask information for an external print server that is attached to the
printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Sets the gateway information for an external print server that is attached to the
printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Understanding printer menus
130