Remove Originals From The Scanner Adf; Remove Paper From Standard Output Bin; Replace Pc Kit; Scan Document Too Long - Olivetti d-Color MF920 Operation Manual

Hide thumbs Also See for d-Color MF920:
Table of Contents

Advertisement

Receiving pXX
The printer is receiving a fax. pXX represents the number of pages received. Wait for the message to clear.
Reload printed pages in Tray <x>
Press
to clear the message and continue processing the second side of the sheet.
Press
, and then press
Remote Management Active
The printer is offline while it configures settings. Wait for the message to clear.

Remove originals from the scanner ADF

Remove the paper from the ADF to clear the message and continue printing.
Remove packaging material
Check for and remove any packaging materials from the toner cartridges.

Remove paper from standard output bin

Remove the stack of paper from the standard exit bin.
Replace <color> cartridge
Replace the toner cartridge, and then press

Replace PC Kit

This is the early warning message for the photoconductor kit. The printer continues printing unless the value for the
Cartridge Alarm is changed from the printer control panel or set to On from the Supply Notifications Web page
(located on the Embedded Web Server).
If the setting is On, then the printer stops printing. Press
When the PC Kit Life Warning appears, order a new photoconductor kit.

Scan Document Too Long

The scan job exceeds the maximum number of pages. Press
message.
Scan to USB failed
An attempt to create a file on the USB drive failed.
to cancel printing.
to clear the message and continue printing.
Understanding printer messages
162
to select Continue and continue printing.
, and then press
to cancel printing and clear the

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-color mf923

Table of Contents