Fax Receive Settings - Olivetti d-Color MF920 Operation Manual

Fax Receive Settings

Menu item
Enable Fax Receive
On
Off
Rings to Answer
1–25
Auto Answer
Yes
No
Manual Answer Code
1–9
Auto Reduction
On
Off
Paper Source
Auto Size Match
Tray <x>
Single Sheet Feeder
Multi-Page Feeder
Sides
On
Off
Fax Footer
On
Off
Max Speed
2400
4800
9600
14400
33600
Block No Name Fax
On
Off
Description
Allows fax jobs to be received by the printer
Note: On is the factory default setting.
Specifies the number of rings before answering an incoming fax job
Note: 3 is the factory default setting.
Allows the printer to answer an incoming fax job
Note: Yes is the factory default setting.
Lets you enter a code on the telephone number pad to begin receiving a fax
Notes:
This menu item is used when the printer shares a line with a telephone
9 is the factory default setting
Scales an incoming fax job so it fits the size of the paper loaded in the designated
fax source
Note: On is the factory default setting.
Specifies the paper source selected to supply paper for the printer to print an
incoming fax
Note: Tray 1 is the factory default setting.
Enables duplex (two-sided) printing for incoming fax jobs
Note: Off is the factory default setting.
Prints the transmission information at the bottom of each page from a received fax
Note: Off is the factory default setting.
Specifies the maximum speed in baud at which faxes are received
Note: 33600 (baud) is the factory default setting.
Enables blocking of incoming faxes sent from devices with no station ID specified
Note: Off is the factory default setting.
Understanding printer menus
140