Saving Energy; Using Eco-Mode; Reducing Printer Noise - Olivetti d-Color MF920 Operation Manual

Avoid paper jams
Carefully select and load paper to avoid paper jams. For more information, see "Avoiding jams" on page 108.

Saving energy

Using Eco-Mode

Use Eco-Mode to quickly select one or more ways to reduce your printer's environmental impact.
Note: See the table for the multiple settings that change when you select an Eco-Mode setting.
Choose To
Energy Reduce energy use, especially when the printer is idle.
Printer engine motors do not start until a job is ready to print. You may notice a short delay before the
first page is printed.
The printer enters Power Saver mode after one minute of inactivity.
Paper Duplex is enabled on printer models supporting duplex.
Energy/Paper Use all the settings associated with Energy mode and Paper mode.
Off Use factory default settings for all settings associated with Eco-Mode. This setting supports the
performance specifications for your printer.
To select an Eco-Mode setting:
1
From the printer control panel, press
2
Press the arrow buttons until Settings appears, and then press
3
Press the arrow buttons until General Settings appears, and then press
4
Press the arrow buttons until Eco-Mode appears, and then press
5
Select the setting you want, and then press
Submitting changes appears.

Reducing printer noise

Use Quiet Mode to reduce the printer noise.
Note: See the table for the multiple settings that change when you select a Quiet Mode setting.
.
.
Minimizing your printer's environmental impact
.
.
41
.