Setting The Clock - Sharp R-898M Operation Manual

R-898M Operation Manual
Your oven has a 12 hour clock.
• To select the 12 hour clock, press the
KITCHEN TIMER/CLOCK SET key twice.
To set the time of day follow the instructions
opposite.
NOTES:
• Press the STOP/CLEAR key if you make a
mistake during programming.
• If you press any of the TIME keys too many
times, continue to press the key until the
desired time re-appears.
• To check the time of day during a cooking
process, press the KITCHEN
TIMER/CLOCK SET key and the time of
day will remain on the display as long as you
keep your finger on the key. This does not
affect the cooking process.
• If the clock is set, when cooking is complete,
the display will show the correct time of day.
If the clock has not been set, the display will
only show ".0" when cooking is complete.
• If the electrical power supply to your
microwave oven is interrupted, the display will
intermittently show ".0" after the power is
reinstated. If this occurs during cooking, the
programme will be erased. The time of day will
also be erased.
• When you want to reset the time of day,
follow the opposite example again.
23/06/2004 15:20

SETTING THE CLOCK

x2
9
Page 9
1. Select the clock.
x2
2. Enter the hours by pressing the TIME keys.
3. Press the KITCHEN TIMER/CLOCK SET
key once.
x1
4. Enter the minutes by pressing the TIME keys.
5. To start the clock, press the KITCHEN
TIMER/ CLOCK SET key once.
x1