Lever To Adjust The Cutting Height; Seat; Refuelling - Jonsered FR2111 Operator's Manual

Lever to adjust the cutting height

Using the lever the cutting height can be adjusted in
9 different positions.
Deck with rear ejection,
Mulching and combi unit,

Seat

The seat has a hinged mounting on the front edge
and can be folded forwards.
The seat can also be adjusted lengthways.
Loosen the handles under the seat and adjust it
forwards or backwards to the desired position.
Secure the adjustment using the handles.

Refuelling

The engine should be run on a minimum of
85-octane grade unleaded petrol (not mixed with
oil). It can be beneficial to use environmentally
adapted alkylate petrol.
Do not use petrol that contains methanol.
Do not fill the tank completely, leave an expansion
area of at least 2.5 cm (1").
WARNING!
Petrol is highly flammable.
Observe caution and fill the tank
outdoors
(see the safety instructions).
PRESENTATION
40-90 mm
(1 9/16" - 3 9/16")
45-95 mm
(1 3/4" - 3 3/4")
8009-251
6004-014
8009-252
15
English –