Right-hand wing cover
Remove the bolts holding the wing cover (2 and 3).
On FR 2113 and FR 2116 the knob (1) should also
be removed.
Left-hand wing cover
Remove the bolts holding the wing cover and lift off
the cover.
Inspecting the silencer
Check regularly that the silencer is complete and
secured correctly.
Temperature variations and vibrations can mean
that the tightening torque for the screws drops. The
screws should be checked when servicing to
guarantee the correct torque. The tightening torque
should be about 10 Nm. Never use a defective
silencer.
WARNING!
The muffler gets very hot in use
and remains so for a short time
afterwards. Contact can result in
burns. Remember the risk of fire.
MAINTENANCE
10mm
~ 10Nm
English –
8009-265
8009-266
8009-685
23