Cutting Height Lever; Seat Safety Switch; Cutting Deck - Jonsered FR 2312 MA Operator's Manual

Product overview FR 2312 M
8 7
9 10
1. Type plate
2. Battery
3. Throttle control/choke control
4. Lever to shift gear
5. Ignition lock
6. Lift lever for the cutting deck
7. Lock button for parking brake
8. Parking brake pedal

9. Cutting height lever

10. Clutch pedal
11. Seat adjustment
12. Fuel tank cap
13. Cover lock

Seat safety switch

The seat safety switch starts the safety circuit when the
operator lifts from the seat. The engine and the drive to
the blades stop if the blades are engaged or the parking
brake is not applied. See also
8 .
Control for throttle and choke
The throttle and choke control adjusts the engine speed
and engages the choke. Move the control forward to
increase the engine speed and rearward to decrease the
engine speed. Move the control to the top to engage the
choke. Use the choke to start the product when the
To start the engine on page 13 .
engine is cold. See

Cutting deck

The product is used with a 2-in-1 cutting deck with
mulch function. The mulch function cuts the grass into
4
6 5
Safety circuit on page
4 3 2
11 12
fertilizer. The 2-in-1 cutting deck can also be used
without the mulch function, for rear discharge of the
grass.
Cutting height lever
The cutting height is adjusted in 5 (1–5) different
positions.
Note: Lift the cutting deck before you adjust the cutting
height.
1
13
512 - 001 - 26.01.2018