Adjusting The Parallelism Of The Mowing; Deck Fr 2111, Fr 2111 M, Fr 2113 Ma - Jonsered FR2111 Operator's Manual

MAINTENANCE FR 2111, FR 2111 M, FR 2113 MA

Adjusting the parallelism of the mowing

deck on FR 2111
1. Check that the tyres' air pressure is 60 kPa
(0.6 kp/cm 2 /8.5 PSI).
2. Dismantle the front cover and the right-hand
wing cover as described on pages 22-23.
3. Vertical adjustment of the mowing deck is
carried out using the adjuster nuts at the rear of
the lifting stay.
4. Raise the mowing deck at the front edge by
shortening the lifting stay.
Lower the mowing deck at the front edge by
lengthening the lifting stay.
5. Tighten the nuts against each other after
adjustment.
6. The parallelism should be checked again after
the adjustment has been made.
7. Fit the right-hand wing cover and the front cover.
Adjusting the parallelism of the mowing
deck on FR 2113 MA, FR 2111 M
1. Check that the tyres' air pressure is 60 kPa
(0.6 kp/cm 2 /8.5 PSI).
2. Remove the front cover and the right-hand wing
cover.
3. Loosen the nut (1) on the parallelism stay.
Remove the locking clip (2) and the parallelism
stay.
4. Turn the fork anticlockwise to raise the cover's
rear edge, clockwise to lower the cover's rear
edge.
5. Secure the parallelism stay using the locking clip
and tighten the nut after adjustment.
6. The parallelism should be checked again after
the adjustment has been made.
7. Fit the right-hand wing cover and the front cover.
2
6008-026H
8009-138
English –
33