Specifying A Recipient; To Use A Program - Konica Minolta Bizhub C450 Enlarge Display Operations

Using fax functions
4.2

Specifying a recipient

!
Detail
Destinations can easily be specified if they have been registered in Utility
mode. For details on registering destinations, refer to the User's Guide
[Facsimile Operations].
To send or receive faxes manually, touch [Off-Hook]. When this button is
touched, the dial tone can be heard from the speaker. For details, refer to
the User's Guide [Facsimile Operations].
The following procedure describes how to specify the recipient where the fax
is to be sent.

To use a program

If a destination has been registered with a program, the fax number can be
dialed simply by pressing the program button.
If a destination has not been registered with a program, the destination can-
not be specified.
If transmission settings have been registered with the program, the functions
are automatically set.
Only one program can be selected.
% In the Program screen, touch the button for the program that you wish
to use.
– Touch [Page List] to select the page of program destinations to be
displayed.
– To cancel the setting, touch the button again to deselect it.
– To clear all of the selected destinations, press the [Reset] key.
– To check/delete the specified destination, press the [Mode Check]
key. For details on checking/deleting destinations, refer to "Check-
ing the settings (Mode Check)" on page 5-9.
– Additional destinations can be added from groups or be entered di-
rectly.
C450
4
4-5