To Specify Redialing - Konica Minolta Bizhub C450 Enlarge Display Operations

4
ing used. "T" appears in the screen. If pulse dialing is being used,
use
– [Pause]: Touch this button to insert a pause when dialing. Touch
[Pause] once to insert a 1-second pause. In addition, multiple paus-
es can be entered. "P" appears in the screen. If the PBX (private
branch exchange) connection is set to "ON", touch [Pause] after the
outside line access code (for example, "0") for accurate dialing
when transmitting from an inside line to an outside line. "P" appears
in the screen.
– [–]: Touch this button to insert the dash as separator symbol while
dialing. This has no effect on the dialing. "–" appears in the screen.
– [Abbr.]: Use the keypad to enter the abbreviated dialing number (up
to 2,000 from 0001 to 2000) and specify a destination registered as
an abbreviated number.

To specify redialing

Dialing the same recipient again is called "redialing".
1
In the Program screen, touch [Direct Input].
The Direct Input screen appears.
2
Touch [Redial].
The Recently Dialed # screen appears.
4-10
to switch to a push-button tone.
Using fax functions
C450