3
%
In the Program screen, touch the button for the desired program.
–
Touch [Index List] to select the page of program destinations to be
displayed.
–
To cancel the setting, touch the button again to deselect it.
–
To clear all of the selected destinations, press the [Reset] key.
–
To check/delete the specified destination, press the [Mode Check]
key. For details on checking/deleting destinations, refer to "Check-
ing the settings (Mode Check)" on page 5-9.
–
Additional destination addresses can be added from group desti-
nations or from the address book.
To select a group destination
"Group" refers to multiple destinations that are registered collectively. The
following procedure describes how to send data by selecting a group that
has been registered in advance.
1
In the Program screen, touch [Group].
The Group screen appears.
3-6
Using scan functions
C450