Selecting Finishing Settings - Konica Minolta Bizhub C450 Enlarge Display Operations

Using copy functions
2.9

Selecting Finishing settings

Various settings can be selected for sorting and finishing copies fed into the
copy output tray.
The following Finishing settings are available.
Setting
Sort
Group
*1
Offset
Corner Staple
*2*3
2 Staples
4-hole Punch
*1
If no finisher is installed and all of the following conditions are met, print-
ed copies can be fed out and sorted in an alternating crisscross pattern.
– A4- or B5-size paper is used.
– Paper of the same size and type is loaded with the w orientation in
one paper drawer and with the v orientation in another drawer.
– The "Auto Paper Select" setting is selected.
– The "Mixed Original" function must not be used.
*2
If the "Corner Staple" or "2 Staples" setting is selected, the "Sort" set-
ting is automatically selected. The "Corner Staple" or "2 Staples" set-
ting and the "Offset" setting cannot be used together.
*3
The Staple settings are available only if optional finisher FS-603 or fin-
isher FS-507 is installed.
*4
The Punch settings are available only if optional finisher FS-507 is in-
stalled or punch kit PK-501 is installed on finisher FS-603.
The following procedure describes how to select Finishing settings.
C450
Description
Select this setting to separate each set of a multi-page document.
Select this setting to separate the copies of each page in a multi-
page document.
Select this setting to feed out and sort printed copies in an alter-
nating crisscross pattern if the sorting conditions are met when no
finisher is installed.
Select this setting to feed out and stack the printed copies on top
of each other with each set shifted to separate it when a finisher
is installed.
*2*3
Select this setting to bind the printed copies with a staple in the
corner.
Select this setting to bind the printed copies with two staples.
*4
Select this setting to punch holes (4 holes) in the printed copies
for filing them.
2
2-19