Selecting A Simplex/Duplex Setting - Konica Minolta Bizhub C450 Enlarge Display Operations

Using copy functions
2.5

Selecting a Simplex/Duplex setting

The type of document and copy can be specified.
The following Simplex/Duplex settings are available.
Setting
1 1
1 2
*1
2 1
*1
2 2
*1
If [2
and the orientation of the loaded document, otherwise the copies will
not be printed as desired.
For details on selecting the position of the binding margin for the docu-
ment, refer to "Selecting the position of the binding margin ("Margin"
settings)" on page 1-18.
For details on selecting the document orientation, refer to "Selecting the
document orientation ("Original Direction" settings)" on page 1-16.
!
Detail
When the document is scanned from the original glass using the [2
[1 2] or [2
gether.
The following procedure describes how to select the Simplex/Duplex setting.
C450
Description
Select this setting to produce single-sided copies from single-sided docu-
ments.
Select this setting to produce one double-sided copy from two single-sid-
ed documents.
Select this setting to produce two single-sided copies from one double-
sided document.
Select this setting to produce double-sided copies from double-sided doc-
uments.
1] or [2 2] is selected, select the position of the binding margin
2] settings, the scanned pages are stored and printed to-
2
1],
2-11