2
–
For details on specifying a copy density setting, refer to page 2-15.
–
For details on specifying combined copy settings, refer to
page 2-18.
–
For details on specifying copy Finishing settings, refer to
page 2-19.
–
For details on selecting the binding setting, refer to page 2-22.
4
Using the keypad, type in the desired number of copies.
–
If the number of copies was incorrectly entered, press the [C] (clear)
key in the keypad, and then specify the correct number of copies.
5
Press the [Start] key.
2-4
Stop
Start
Using copy functions
C450