2
2.10
Selecting center binding
Printed copies can be fed out folded in half and stapled at two places along
the center.
!
Detail
Copies can be bound at the center only if finisher FS-603 is installed.
To select center binding
1
In the Basic screen, touch [Fold & Staple].
The Center Erase settings screen appears.
2
Touch the button for the desired Center Erase setting.
–
To erase the area along the center, touch [Yes]. To not erase the
area along the center, touch [No].
–
If "Yes" is selected under "Center Erase", an area of 10 mm along
the binding is erased.
–
If paper misfeeds often occur when "No" is selected under "Center
Erase", select "Yes" to reduce the number of paper misfeeds.
–
To cancel the "Fold & Staple" function, touch [OFF].
–
To cancel changes to the settings, touch [Cancel].
3
Touch [OK].
The Basic screen appears again.
2-22
Using copy functions
C450