Specifying A Recipient; Specifying A Single Recipient; Manual Dialing; One-Touch Dialing - Konica Minolta bizhub 181 User Manual

2
2.4

Specifying a recipient

Specifying a single recipient

Use any of the following methods to specify a single recipient.

- Manual dialing

- One-touch dialing

- Speed dialing
- Group dialing
- Program dialing
- Phone book dialing
As an example, the following procedures describe how to send faxes using
the document feeder.
!
Detail
If the country code and recipient's fax number are entered immediately
after the prefix for an international call (001, 0061 or 0041) when sending
international faxes, not enough time may be allowed for establishing a
connection, causing a busy signal to be heard. If this is the case, press
the [Redial/Pause] key twice before entering the country code and fax
number so that there is a pause of about 6 seconds after the prefix for
international calls is dialed. If a connection still cannot be established,
send the fax manually. For details, refer to "Faxing after completing a tel-
ephone call (manual faxing)" on page 2-29.
Manual dialing
1
Press the [Fax] key to enter Fax mode.
2
Position the document to be faxed.
– Refer to "Positioning the document" on page 2-6.
3
If necessary, select the Quality setting.
– For details on selecting the Quality setting, refer to "Selecting the
fax quality" on page 2-10.
2-12
Faxing
Fax kit FK-506