4
To select a destination from the address book
If a destination has been programmed, the fax number can be found with the
registered index characters and dialed.
1
In the Program screen, touch [Address Book].
The Address Book screen appears.
2
Touch the button for the destination where the fax is to be sent.
–
The selected button appears highlighted.
–
The corresponding address appears as the name of the registered
destination when an index button is touched.
–
To cancel the setting, touch the button again to deselect it.
–
To clear all of the selected destinations, press the [Reset] key.
–
To check/delete the specified destination, press the [Mode Check]
key. For details on checking/deleting destinations, refer to "Check-
ing the settings (Mode Check)" on page 5-9.
–
The letter at the beginning of the button name indicates the follow-
ing information registered in the address book.
A: Dialed destination
E: E-mail destination
B: Box destination
–
Additional destinations can be added from programs or groups.
4-8
Using fax functions
C450